The printer
Places the missing blocks around you while you move through the build.
The printer places blocks for you. Many servers count that as cheating. Check the rules of the server before you use it. It is off by default.

Use it #
- Press B, click at the bottom right and turn on Printer mode (auto-build) in the Building tab. Or set a key for Toggle Printer, see Shortcuts.
- Stand in or next to the build and turn the printer on.
- Move through the build. The printer places what is missing around you.
- On the status panelThis icon shows while the printer is on. See Status panel.
How it works #
- It places blocks the same way Easy place does: direction, state, tools and sign text all work the same.
- It only uses blocks you carry. In creative it uses any block.
- A block that is only in a bundle you carry is taken out into an empty slot and used from there. That is on 1.21.2 and newer; before that a bundle only gives out its last item. Shulker boxes stay closed: the game has no way to take items out of a carried shulker box.
- It stays within the Printer reach you set, 4 blocks by default.
- It builds layer by layer from the bottom up. In each layer it places full blocks first, then stairs, slabs, glass and doors, and decoration such as torches, plants and redstone last.
- The layer under your feet goes in first, so you can fly at a sky base and land on it. The blocks right around you at your own height go in last, so the way out stays open.
- It never fills the block you stand in.
- It only builds against a block once the server has confirmed it. At high speed that keeps a block from ending up one cell off.
- A block that failed is tried again when something changes: a block is placed, or you move.
- Blocks you do not carry are skipped until your inventory changes. Water is only poured with Water and other liquids on, see below. A block resting on one you do not carry does not stop it.
- It builds into water, lava, short grass and other plants a block can replace.
- It places item frames, paintings, armor stands, end crystals, minecarts and cushions too, from the items you carry. Armor stands face the right way and wear their armor, and a painting with the wrong motif is taken down and tried again.
- While it is on, chests, furnaces and sign screens do not open on you. Your own inventory and menus do.
- With the Layer view on it prints only the layers on screen. With only some materials on show it prints only those.
- Where the build's own cover would turn grass to dirt anyway, it uses dirt, so your real grass stays for the spots that keep it.
The printer starts with the block in your hand and places the same blocks together, so it changes block far less often and a build with several materials goes up faster. An observer goes down only after the block it watches, so it does not pulse the machine while you build. Cauldrons are filled, note blocks tuned to their note and daylight detectors turned to day or night. Banners, heads and decorated pots get the build's patterns, players and sherds.
Settings #
- Printer speed default 4 blocks/tick
- How many blocks are placed each tick, from 1 to 16. Higher is faster and more likely to be noticed by anti-cheat.
- Printer reach default 4 blocks
- How far from you the printer places, from 1 to 6 blocks. 4 stays inside normal hand reach. On a server that refuses blocks placed further, the printer pulls back to what that server accepts and remembers it.
- Fix wrong states default On
- Also fixes blocks that are placed but set wrong, such as a gate that should be open.
- Face directional blocks yourself default Off
- Waits until you look the right way before placing barrels, pistons, observers, droppers, dispensers and crafters. Off, the printer turns your view for them.
Barrels, pistons and observers #
These blocks point where you look. By default the printer turns your view for a moment, waits for the server and checks each one. Only blocks that point up or down too wait like this: stairs, doors, furnaces and other blocks that only turn sideways go down without a pause. If one ever comes out facing another way on a server, it stops turning there and says so in chat. Turn Face directional blocks yourself on to have the printer wait until you face the right way instead.
Where the server allows exact placement nothing needs turning or waiting: these blocks land turned right whichever way you look.
Exact placement #
Where the server supports it, easy place and the printer tell the server which way a block faces along with the click. Observers, pistons, stairs, slabs and logs then come out exactly as the build has them, whichever way you look, and your view does not turn.
| Where | What it needs |
|---|---|
| Single-player | Nothing. |
| Servers with VoxelSprout Policy | Nothing more. Its admins can turn it off with the Exact placement rule. |
| Servers with Servux | Nothing more. |
| Servers with Carpet | carpet-extra, with its accurateBlockPlacement turned on. |
BuildPrint asks each server for itself, also each server behind a proxy, and only uses it where that server said yes. Everywhere else the printer works as described above: it turns your view, or with Face directional blocks yourself on it waits for you to face the right way.
Blocks from shulker boxes and backpacks #
A block that is only inside a shulker box or backpack you carry can be used too. Turn on Take from carried boxes in the Building tab of the settings, under Printer (automation). It is off by default. Easy place uses it as well.
How the block comes out depends on where you play. BuildPrint uses the quickest way there is:
- In single-player it comes straight out of the box.
- On a server with VoxelSprout Policy, Take It Out or Shulker Pick Block, the server moves it into your inventory. No screen opens.
- On a server with Quick Shulker (Multi), Builder's Shulkers, Traveler's Backpack or Sophisticated Backpacks, BuildPrint opens the box or backpack through that mod, takes the block and closes it again.
- With AxShulkers or another plugin that opens a shulker box from your hand, it holds the box for a moment, opens it and puts it back.
- Anywhere else only with Set boxes down to empty them on, see below.
A box opened this way does not show on your screen. A way that gets no answer twice is not tried again on that server until you rejoin. The full list of mods and plugins is on Other mods and servers.
Bundles do not need this setting: blocks in a bundle you carry are used on 1.21.2 and newer, unless the server's VoxelSprout Policy turns taking from carried boxes off.
A server with VoxelSprout Policy can turn taking from carried boxes off, and that stops taking from bundles too. Strict anti-cheat may not allow it either.
Set boxes down to empty them #
With this on you can lose a shulker box. It is off by default, and only works with Take from carried boxes on.
On a server with no way to take blocks out of a carried shulker box, BuildPrint can do what you would do by hand: set the box down next to you, open it, take every stack of the block it needs, break the box and pick it up again. Turn on Set boxes down to empty them, right under Take from carried boxes. It is for shulker boxes, not backpacks.
- It only runs while you stand still on the ground, not while you fly, fall, swim, ride or glide. The other ways above work in flight too.
- It never sets a box down with lava, fire, a campfire, cactus, water, a hopper, a portal or the void close by.
- It only uses a spot where the box drops back onto the floor you stand on, never onto a ledge or down a hole.
- It keeps one slot in your inventory free for the box to come back into.
- If the box rolls away when it breaks, BuildPrint walks you over to it.
- If the box cannot be broken, or does not come back within five seconds, chat says where it is. So does leaving the server while it stands.
With Tweakeroo #
While the printer runs, Tweakeroo's Hand Restock, Repair Mode, Hold Use and Fast Right Click are held back, so they do not swap or place over it. While you hold easy break, Break Replace and the breaking restrictions are. Your Tweakeroo settings stay as they are. With Tweakeroo's Free Camera on, the printer waits and says so. Its reach override does not make the printer click further than the server allows.
Water and other liquids #
Experimental, and off by default.
Turn on Water and other liquids in the Building tab of the settings, under Auto-use tools. Easy place and the printer then pour the build's water, and the liquids of other mods, with the buckets you carry.
- Only the sources go down, and only once the blocks around them are up, so nothing floods. Flowing water and lava do not count as blocks to place.
- Blocks the build wants waterlogged get their water too, where it cannot run out.
- Bubble columns are built as water over the soul sand or magma. The material list counts them as water.
- A layer of water out over other water, away from the walls, gets a few pours and the water spreads over the rest.
- A waterfall from a source in mid-air is read as the game makes it: one source, and the water falling from it.
- It fills big rivers and lakes, rivers open at an end, and canals lined with walls, stairs or slabs.
- Empty buckets are filled again from water that refills by itself.
- Lava only goes down with easy place, where you click, with a lava bucket in your hand and nothing that burns close by.
- A bucket can still land in the wrong spot. BuildPrint then takes the water back and leaves that spot to you.
In creative, Paste puts the whole build in at once.
What it does not place #
- Water and lava, unless Water and other liquids is on.
- What is inside chests and other containers. Use Fill in the open container, see Container contents.
When it stops #
The printer says so above the hotbar when it has nothing left to place around you: No items in your inventory for the blocks here. If what you carry goes somewhere else in the build, it says what and how many blocks away, and shows where. It picks a block up again as soon as you refill it.
The printer also stops while the server is not answering, when it freezes or the connection stalls, and goes on once the server is back. That keeps it from placing blocks wrong or twice. With Tweakeroo's Free Camera on it waits too, and says Waiting while Tweakeroo's Free Camera is on.
Works in single-player but not on a server? Each server accepts different things. See The printer on different servers.
/buildprintdebug printlog on writes what the printer tries, and what holds it back, to the game log. Send that with a bug report about the printer stopping.
Next, you may want to
Something missing or wrong on this page? Say so on Discord.